ChangeMeN0w
zero
/
4
5.
Step 6. Initial remote login
1.
Open your Microsoft Internet Explorer browser on your compute and enter the IP address of the
2.
In the login window, enter your
User Name
and
Password
Login
. The default
User Name
and
Password
for cameras is
admin
and
3.
a.
In Internet Explorer, click the Tools icon (located to the right of the tabs), then select
Compatibility View settings from the drop-down menu.
b.
In the Compatibility View Settings window, ensure that the IP address of your camera is in the
Add this website
Add
.
c.
After clicking
Add
, the IP address will appear in the Websites list. Click
Close
.
d.
If a message on the screen requesting that you install a plug-in (see below), click on the
message and continue with the following sub-steps. A message box will appear at the
bottom of the window to install the WebComponents plug-in. Otherwise, continue with step
“Step 7. Setup Fisheye Parameters” on page 5.
e.
In the message box, click
Run
to install WebComponents.exe. The following pop-up window
will open. When this window appears, close the browser.
f.
Click
Next
to install WebComponents. Allow the plug-in installation to complete. When the
following window appears, click
Finish
.
EXPCMR-IP-POE-DPTZ
www.larsonelectronics.com
