![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3745446085.webp)
81
Explosion Proof Network IP Camera User Manual
Note:
You are allowed to draw up to 4 areas on the same image.
5.
Click
Stop Drawing
to finish drawing or click
Clear All
to clear all of the areas
you set without saving them.
6.
Click
Save
to save the settings.
6.5.5
Configuring Picture Overlay
Purpose:
Picture overlay enables you to overlay a picture on the image. This function enables a
certain enterprise or users to overlay their logo on the image.
Note
:
The picture must be in RGB24 bmp format and the maximum size of the picture
is 128*128.
Steps:
1.
Enter the Picture Overlay Settings interface:
Configuration > Advanced Configuration> Image > Picture Overlay
Figure 6-43 Picture Overlay
2.
Click
Browse
to select a picture.
3.
Click
Upload
to upload it.
4.
Check
Enable Picture Overlay
checkbox to enable the function.
X Coordinate and Y Coordinate values are for the location of the picture on the image.
And the Picture width and height shows the size of the picture.
Summary of Contents for EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Page 8: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 56: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 147: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...