![background image](http://html1.mh-extra.com/html/larson-electronics/epl-tl-1x10w-c-pa-xfsw/epl-tl-1x10w-c-pa-xfsw_instruction-manual_3805265003.webp)
EPL-TL-1X10W-C-PA-XFSW
4.
Make sure conduit or cable are properly sealed. Electrical components must be kept free of moisture, including
condensation, at all times.
CAUTION:
To prevent ignition of hazardous atmosphere, disconnect the device from the supply circuit before opening.
After de-energizing, delay 10 minutes before opening. Keep assembly tightly closed when in operation.
NOTE: ATEX and IECEx units only:
The temperature class is determined by the maximum ambient and/or process
temperature. Units are intended to be used in ambient of -20°C ≤Tamb≤73°C. Units may be used in process
temperatures up to 133°C providing the enclosure and switch body temperature do not exceed 73°C. The standard
Temperature Class is T6 Process Temp ≤73°C.
5. For units supplied with both internal ground and external bonding terminals, the ground screw inside the housing must
be used to ground the control. The external bonding screw is for supplementary bonding when allowed or required by
local code. When external bonding conductor is required, conductor must be wrapped a minimum of 180°about the
external bonding screw. See below.
MAINTENANCE
Inspect and clean wetted parts at regular intervals. The cover should be in place at all times to protect the internal
components from dirt, dust, and weather, and to maintain hazardous location ratings. Disconnect device from the supply
circuit before opening to prevent ignition of hazardous atmosphere. Repairs to be conducted by Larson Electronics, Inc.
Units in need of repair should be returned to the factory.
FRONT VIEW DETAIL
SIDE VIEW DETAIL
CLAMP
SCREW
LOCKWASHER
CONDUCTOR
TERMINAL CONNECTIONS
SPDT
DPDT
PARTS LIST
1.
Cover lock.
2.
External ground.
3.
Enclosure housing and cover.
4.
Terminal block.
5.
Internal ground.
*6. Magnet arm and switch
assembly.
7.
Switch body.
*8. Float, arm and block assembly.
*Approved replacement parts
19-7/32
[488.16]
ATEX/IECEx unit
1-5/8
[41.28]
5
[127.00]
6
[152.40]
8-7/32
[208.76]
5
[127.00]
3
[76.20]
3/4 NPT
1-1/2 NPT
2-
.93]
1/2
[63.50] 3-1
[84
1/32
1
2
3
5
6
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
4