EPL-DL-12-25-1523
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
3
USING THE HAND LAMP
1.
Position light head in desired location using swivel hook.
2.
Run cable and plug
OUTSIDE HAZARDOUS AREA
.
3.
Attach power cord from light to
Voltage:
12V AC or DC
compatible receptacle.
WARNING:
Hand lamp operates on 12V AC/DC!
DO NOT plug into high voltage! Failure to comply could cause damage to fixture which may not
be covered by warranty.
OPERATION
The LED lamp in this hand lamp is “instant-on” and will illuminate once power is supplied.
LAMP REPLACEMENT
1.
Loosen set screw.
⑧
2.
Unscrew Guard/Globe assembly
⑨
from handle assembly.
3.
Replace lamp with 75 watt(max) bulb for Group F & G locations or
10 watt(max) bulb for Group C and D locations.
4.
Inspect o-ring seal
⑪
. If worn or damaged, it must be replaced to
insure watertight seal.
5.
Screw globe assembly completely onto lamp base.
6.
Tighten set screw securely to 6 in-lbs.
USE AND CARE
Unauthorized modification may impair the function and/or safety of
this device and could affect the life of the equipment. Always check
for damaged or worn out parts before using the device. Store it in a
secure place out of the reach of children when not in use. Inspect for
good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
EPL-DL-12-25-1523
is designed to provide years of reliable
performance. Should the need for replacement parts arise, please
contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS
PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD
FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED,
PLEASE
CONTACT
LARSON
ELECTRONICS
BY
AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER
ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
