background image

EPL-16C-1MLED-300

 

Explosion Proof LED Tank Light

21,000 Lumens LED - Wheelbarrow Cart - 300' Cord - C1D1 C2D1

Instruction Manual

Thank you for your purchase of the Larson Electronics EPL-16C-1MLED-300 Explosion Proof LED Tank Light. 

WARNING 

TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED, 

INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL 

APPLICABLE ELECTRICAL CODES. 

TO AVOID ELECTRIC SHOCK: 

BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

PRODUCT MUST BE  CONNECTED TO A WIRING  SYSTEM  WITH AN EQUIPMENT-GROUNDING

CONDUCTOR.

TO AVOID EXPLOSION: 

MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.

ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS

ATMOSPHERE.

DO  NOT  OPERATE  IN AMBIENT  TEMPERATURES  ABOVE  THOSE  INDICATED  ON  THE PRODUCT

NAMEPLATE.

DO  NOT  OPERATE  IF THE  LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED  OR

DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.

ALL FASTENERS SHOULD BE PROPERLY SEATED.

The EPL-16C-1MLED-300 Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 Division 1-2 

Groups C&D and Class II Division 1-2 and uses Cree LEDs to produce 21,000 lumens of light while drawing only 150 watts.

Larson Electronics, LLC

 

Phone: (877) 348-9680

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

1

 of 

2

 

The light fixture on this wheelbarrow cart is factory sealed. 

CART OPERATION 

The wheelbarrow cart assembly consists of 2 parts: 

1.

Light head

2.

Wheelbarrow cart base

To assemble cart, insert light head over center hole 
of wheelbarrow cart and tighten hand screw. The

 

wheelbarrow cart is now ready for use.

Tilt cart using both handles and maneuver like a 
wheelbarrow. Simply roll entire assembly to a new 
location

 

once assembled. Make sure light head is 

secure prior to maneuvering cart.

This portable LED cart light has a removable light 

head measuring 16 inches in diameter which allows 

the unit to fit through the standard sized manholes or

entry passages commonly found in the petrochemical and marine industries. Often simply referred to as a 

“tank light”, this unit is considered universal due to its ability to be passed through any conventional manhole 

such as those found in petrochemical containers and ship storage tanks.

WARNING:

 

Be sure all hand screws are tight before transporting! Use caution when maneuvering near inclines 

or drop offs.

 

 

To adjust light head vertically, loosen hand screws on either side. Once desired angle is achieved, 

tighten both hand screws to secure light in its place. Loosen the single hand screw holding light head to rotate 

horizontally. Be sure all hand screws are tight before transporting!

Reviews: