EPF-FM-30-50C
Larson Electronics, LLC
Phone:
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
30" Electric Explosion Proof Fan
EPF-FM-30-50C
Instruction Guide
Thank you for your purchase of the Larson Electronics EPF-30 series Explosion Proof Fan. This fan
is completely assembled, tested and ready for installation when shipped from the factory. Please follow the
steps below in order to operate and maintain this product.
IMPORTANT
READ CAREFULLY BEFORE OPERATING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE EPF-30 MUST BE OPERATED IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE AND ALL
APPLICABLE LOCAL CODES.
FOR PERSONAL SAFETY, ALWAYS CONFIRM THE RATING OF ANY KNOWN HAZARDOUS OR POTENTIALLY
HAZARDOUS LOCATION WHERE THE FAN IS TO BE USED.
WARNING:
TO PREVENT IGNITION OF A HAZARDOUS ATMOSPHERE, THE SUPPLY CIRCUIT SHOULD BE
DISCONNECTED WHEN INSTALLING OR PERFORMING ANY MAINTENANCE ON THIS UNIT.
WARNING:
WHEN INSTALLING THIS FAN IN HAZARDOUS LOCATIONS, CHECK THE OPERATING
TEMPERATURE LIMITS PRIOR TO INSTALLATION TO BE SURE IT CONFIRMS TO THE ENVIRONMENTAL
TEMPERATURE RESTRICTIONS AND NEC CLASSIFICATIONS. CHECK THE NAMEPLATE FOR TEMPERATURE (T)
RATINGS.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT US ANY SOLID-STATE SPEED
CONTROL DEVICE WITH THESE FANS.
WARNING:
OPERATE FAN ONLY AT THE VOLTAGE OF YOUR SPECIFIC SUPPLY CIRCUIT.
WARNING:
SUBSTITUTE COMPONENTS MAY IMPAIR EXPLOSION PROOF SAFETY.
WARNING:
BEFORE SERVICING OR CLEANING THE UNIT, SWITCH THE POWER OFF AT THE SERVICE PANEL
AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.
Power
ALL ELECTRICAL WORK SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN.
Be sure the voltage and cycles shown on the motor nameplate correspond to the power supply. Check
product nameplate for Ratings and Approvals.
This explosion proof fan is equipped with 50 feet of 16/3
chemical and abrasion resistant SOOW line-in cord that is fitted with an explosion proof cord cap for easy
connection to explosion proof outlets.
BE SURE TO CONNECT
TO
THE VOLTAGE, FREQUENCY AND
PHASE TO BE USED.
Before activating fan, inspect to be sure
that there are no obstructions or debris
that would interfere with the propeller.
Check all fasteners for tightness.
(877) 348-9680
