background image

Ver.0518-1 

CL1B-MS-1227

Larson Electronics LLC 

MOTION SENSOR OPERATION 

When the motion sensor detects movement, the LED lights are turned on. 
Once the motion has stopped, the lights will turn off. 

Sensitivity

Time 

Delay

 and 

Lux

 can be adjusted with their respective control dials on the 

motion sensor. 

1.

The 

SENSITIVITY

 setting controls the distance in which the motion

sensor will work. The lowest setting will trigger the motion sensor
when motion is close. The highest setting will trigger the motion
sensor when motion is far.

2.

The 

TIME

 setting controls how long the unit remains illuminated

following activation & after all motion ceases. The minimum time
(fully anti-clockwise) is approximately 5 seconds and the maximum
time (fully clockwise) is approximately 5 minutes. Set the control to
the desired setting between these limits.

3.

The 

LUX

 setting determines the level of darkness required for the

unit to start operating. The setting is best achieved by the procedure
below:

Set the LUX control knob fully anti-clockwise. The unit will now start 
operating at dusk. If you require the light to activate earlier, wait until the 
ambient light level reaches the level of darkness at which you wish the lamp 
to become operative, slowly rotate the control in a clockwise direction until a 
point is reached where the lamp illuminates. Leave the control set at this 
point. At this position, the unit should become operative at approximately the 
same level of darkness each evening. Observe the operation of the unit. If 
the unit is starting to operate too early (e.g. when it is quite light), adjust the 
control slightly anti-clockwise. If the unit starts to operate too late (e.g. 
dusk), adjust the control slightly clockwise. Continue to adjust until the unit 
operates as desired. 

MOTION SENSOR POSITION 

The motion sensor’s position can be adjusted by loosening the hand screw 
on the side, repositioning, and tightening the hand screw. 

9419 US-HWY 175 

Kemp, TX 75143 USA 

P:

 

800-369-6671 | INTL: 903-498-3363 F:

 

903-498-3364 

[email protected]

 

www.larsonelectronics.com 

Reviews: