![background image](http://html1.mh-extra.com/html/larson-electronics/atex-expcmr-ip-poe-2mpir-108d/atex-expcmr-ip-poe-2mpir-108d_quick-installation-manual_3736853026.webp)
22
Explosion Proof Network IP Camera User Manual
Chapter 3 Access to the Network
Camera
3.1
Accessing by Web Browsers
Steps:
1. Open the web browser.
2. In the browser address bar, input the IP address of the network camera, and press
the
Enter
key to enter the login interface.
3. Activate the network camera for the first time using, refer to the section 2.1.2 for
details.
Note:
The default IP address is 192.168.1.64.
If the camera is not activated, please activate the camera first according to
Chapter 3.1 or Chapter 3.2.
4. Select English as the interface language on the top-right of login interface.
5. Input the user name and password and
click
.
The admin user should configure the device accounts and user/operator permissions
properly. Delete the unnecessary accounts and user/operator permissions.
Note:
The device IP address gets locked if the admin user performs 7 failed password
attempts (5 attempts for the user/operator).
Figure 3-1 Login Interface
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...