background image

EPF-RME-12-0.25HP

Larson Electronics, LLC

 

  Phone: (800) 369-6671 

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

2

 

of

 

2

 

The EPF-RME-12-0.25HP from Larson Electronics is an Explosion Proof Exhaust Fan for use in flammable environments. 

Equipped with a built-in bird screen, this multi-tap unit operates on single-phase 115/230V AC 60Hz. The 1/4 horsepower 

(HP) explosion proof fan is constructed of non-sparking/spun aluminum and is compatible with roof/ceiling mounting 

applications.

This fan is completely assembled, tested and ready for installation when shipped from the factory. It is for general ventilation use only. Do 
not use to exhaust dirt, dust, grease or lint-laden air. 

Vibration or jarring in transit may cause loosening of bolts, nuts and set-screws or misalignment of the propeller. Check these items 
before installing the fans. 

Mount fan only for upward discharge (up to vertical). Downward discharge requires addition of a propeller retainer for completely safe 
operation. 

Propeller blades must be cleaned periodically to prevent accumulated dirt from causing unbalance. 

LUBRICATION:

- Motors are equipped with pre-lubricated ball bearings. The original supply of grease is kept free from dirt, grit or outside 

contamination by the bearing seals and, under normal operating conditions, does not require replenishment for the life of the bearing. 

WARNING: We strongly recommend that only a licensed electrician install this product. 

VOLTAGE

The EPF-RME-12-0.25HP operates on single-phase 115/230V AC 60Hz.

WIRING

The explosion proof exhaust fan is a hard-wired unit that should be installed according to national, state and local electrical 

and mechanical codes.

MOUNTING

Operators  may  mount  the  fan  on  ceilings  or  roofings  during  installation. When installed, the fan mounting bracket will 

allow the exhaust fan  to  remain  in  the  upright  vertical  position.

MAINTENANCE 

There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the 

fixture for proper function. 

Disconnect power running to the 

unit

 and be sure the fixture is cool to the touch.

Use a non-abrasive cleaning solution to clean the 

unit

.

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment. 

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of 

children when not in use. Inspect for good working condition prior to storage and before re-use.

 

 

REPLACEMENT PARTS

The 

EPF-RME-12-0.25HP

 is designed to provide years of reliable performance. Should the need for replacement parts 

arise, please contact Larson Electronics. 

THESE INSTRUCTIONS MAY  NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. 

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT 

[email protected]

 OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE. 

PLEASE VISIT LARSONELECTRONICS.COM FOR 

WARRANTY

 AND 

RETURN

 INFORMATION.

Reviews: