Larson Davis SoundAdvisor 831C, Reference Manual

Page: 80 / 214

SoundAdvisor Model 831C Saving, Moving, or Copying Data Files 8-13
Step 2
Highlight the desired data file, and select Menu (
//*
).
Step 3
Select
Create Average
from the pop-up menu.
Step 4
In the Data File Manager, highlight a different data file, and select Menu
(
//*
).
Step 5
Select Add to Average from the pop-up menu.
Step 6
Repeat steps 4–5 until all data files you want to average have been added.
Step 7
Press Close (
/*/
) to close the Data File Manager, then navigate to the Overall
display to view the average data.
Step 8
To save the averaged data file, press Stop/Store
7
.
8.3 Saving, Moving, or Copying Data Files
In this section:
• 8.3.1 About Data File Naming Conventions
•
8.3.2 Moving or Copying Data Files to a USB Drive
8.3.1 About Data File Naming Conventions
In addition to manually naming a data file, there are 2 conventions the 831C
uses to automatically generate unique file names. These are a product of the
run mode indicated in a setup. Table 8.2 contains details and examples.
Table 8.2 Data File Naming Conventions
Run Mode
File Naming
Convention
Example Additional Information
Manual Stop “Default Data
File”.NNN
831_Data.001 The “Default Data File” can be
changed on the General setup page.
NNN represents single digits that
increment sequentially from 001–
999, then reset to 001 to create a
unique filename.
Continuous-
Up to 48 daily auto-
stores per day
(choose a period:
range from every 24
hr–30 mins)
YYMMDDXX.LDO 18031401.LD0 The filename is 12 characters and
includes the year, month, and day
followed by 2 digits. The values of XX
increment from 00 –99 to create a
unique filename.