SoundAdvisor Model 831C
Saving, Moving, or Copying Data Files
8-14
LEARN MORE
For more information on continuous auto store, see section 6.2.3
.
8.3.2 Moving or Copying Data Files to a USB Drive
Complete this section to move or copy a data file from internal memory to a
USB drive.
Step 1
Insert a USB drive in the 831C. Wait for the
USB icon
to appear in the
meter Status bar (about 10 seconds).
If the Data Storage setting is set to USB, but no USB drive is inserted,
the
USB not available icon
appears. Files save to the internal
memory until you insert a USB drive.
Step 2
Go to
Tools
3
Data File Manager
.
Step 3
Highlight the desired data file, and press
Menu
(
//*
).
Step 4
Select one of the following actions from the pop-up menu:
•
Copy File to USB
The data file will be copied onto the USB drive. The original file will
remain saved on the 831C.
•
Move File to USB
The original data file moves from the internal memory to the USB
drive.
•
Copy All Internal to USB
Copies of all data files on the 831C are saved to the USB drive. The
original data files remain saved in internal memory.
•
Move All Internal to USB
All original data files move from the internal memory to the USB drive.
The internal memory is blank.
Continuous- Stores
Every 15 mins or 10
mins
YYMMDDXX.LD0
1610110A.LD0 The filename includes the year,
month, and day followed by a
hexadecimal number that
increments from 00–FF to create a
unique filename.
Continuous- Stores
every 5 mins, 3 mins,
or 2 mins
YYMMDDXXX.LD0
181205AA6.LD
0
Filename is 13 characters: the year,
month, and day followed by 3
alphanumeric values that increment
from 000–FFF to create a unique
filename.
Table 8.2 Data File Naming Conventions
Run Mode
File Naming
Convention
Example
Additional Information
