SoundAdvisor Model 831C
Creating a Custom Setup File On the Meter
6-2
6.2 Creating a Custom Setup File On the Meter
While measurement settings can be indicated directly in the
Active
setup, it’s
a good practice to save a custom setup file for each specific measurement.
Complete all sections to accomplish this.
In this section:
•
6.2.1 Creating a New Setup File On the Meter
•
6.2.2 Customizing Setup Values On the Setup Manager Tabs
•
•
6.2.1 Creating a New Setup File On the Meter
Step 1
On the 831C, go to
Tools
3
Setup Manager
.
Step 2
In the Setup Manager File list, highlight the
Default
setup in the list and press
5
. This opens the Setup Manager pop-up menu.
Step 3
Select
Save As
. This opens the virtual keypad.
FIGURE 6-2
831C Virtual Keypad
Step 4
Enter a name for your Setup using the navigation buttons and select
OK
. Your
setup file appears in the Setup Manager list.
6.2.2 Customizing Setup Values On the Setup Manager Tabs
Some tabs (pages) in this section become available when you purchase and
install optional firmware from Larson Davis. If a step indicates a feature that
isn’t available on your meter, move on to the next step.
Before you begin:
•
Create a new Setup file on the meter.
