Larson Davis SoundAdvisor 831C, Reference Manual

Page: 31 / 214

SoundAdvisor Model 831C Operating the 831C Using the Meter Display 3-1
Module 3 Getting Started
In this module:
3.1 Operating the 831C Using the Meter Display .....................................................................3-1
3.2 Operating the 831C Remotely .............................................................................................3-1
3.2.1 Operating the 831C from G4 LD Utility Software .................................................3-2
3.2.2 Operating the 831C from the LD Atlas App ..........................................................3-2
3.2.3 Operating the 831C from a Web Browser ............................................................3-3
3.3 Setting File Storage Preferences ........................................................................................3-3
3.3.1 Selecting a File Storage Location .........................................................................3-3
3.3.2 Using the 831C File Storage Calculator ................................................................3-4
3.1 Operating the 831C Using the Meter Display
Step 1
Prepare your data file storage preferences as shown in 8.1 "Setting Data File
Storage Preferences" on page 8-9 .
Step 2
Create a measurement setup file as shown in Module 6 Creating a
Measurement Setup .
LEARN MORE
Depending on your measurement type and installed firmware options,
Modules 15-18 may be helpful while creating the measurement setup file.
Step 3
Calibrate your 831C as shown in
Module 5 Calibrating Your SoundAdvisor
831C
.
Step 4
Make a measurement as shown in
Module 7 Making a Measurement
.
LEARN MORE
Depending on your measurement type, Module 4 Environmental Noise
Study Example in the G4 LD Utility Manual may also be helpful.
Step 5
Use the 831C File Manager to view and work with data files on the meter. For
more information, see the following sections:
• 8.2 "Using the Data File Manager" on page 8-10
• 8.3 "Saving, Moving, or Copying Data Files" on page 8-13
Step 6
For more information about modeling your measurement data files in G4, see
the G4 LD Utility manual, Module 7 Working With Data Files in G4.
3.2 Operating the 831C Remotely
In this section:
• 3.2.1 Operating the 831C from G4 LD Utility Software
• 3.2.2 Operating the 831C from the LD Atlas App