SoundAdvisor Model 831C
Setting up a Measurement With Time History
16-1
Module 16
Using Time History
T
he Time History feature provides a table of metrics recorded at regular
intervals according to the settings you choose, and provides a method of
graphing the measurement metrics over time. This feature is active on your
instrument when you purchase and enable firmware option 831C-LOG or
831C-ELA.
In this module:
16.1 Setting up a Measurement With Time History
Time History describes the measured sound as a table of metrics recorded at
regular intervals.
Before you begin:
•
Verify that firmware option 831C-LOG is installed and enabled on your
meter. For more information, see
.
•
Create a measurement setup file (Setup) as shown in
Custom Setup File On the Meter
.
Step 1
Navigate to
Tools
3
Setup Manager
.
TAKE NOTE
The G4 LD Utility also provides a simple, file transfer-style interface for
configuring, saving, and transferring Setup files to your PC or to another meter.
For more information, refer to the
G4 LD Utility Manual
.
Step 2
Highlight the name of the Setup you want to configure with Time History, and
press the top right softkey (
//*
) until the
Time History
tab displays.
