Larson Davis 831C-FFT, Reference Manual

Page: 158 / 254

SoundAdvisor Model 831C Making a Manual Sound Recording Using Mark Sound Type 153
FIGURE 19-1
Setup Manager Markers
1.
To enter or edit a sound type name, highlight the name field
and press Enter
5
.
Step 4.
When your sound settings are complete, press the
Close
softkey (
/*/
), and
save the Setup.
Step 5.
Next, set your setup file as the
Active
Setup.
Step 6.
Press the Close softkey(
/*/
), and save your Setup. If you select Cancel , you
return to the Setup Manager without saving.
Step 7.
Run a measurement and manually mark the sound types as shown in 19.2
Making a Manual Sound Recording Using Mark Sound Type .
19.2 Making a Manual Sound Recording Using Mark Sound Type
During a measurement, you can manually record any sound the meter is measuring.
Before you begin:
• Complete the process shown in 19.1 Setting Up Markers for Sound Recording .
Step 1.
With a measurement currently running, use the
left or right softkeys
(
*/*
) to navigate to the
Live
tab.
Step 2.
Press
Menu
(
/*/
) and select
Mark Sound Type
. As shown in Figure 19-2, the
bottom half of the screen displays a list of all enabled markers (sound types).
1.