40
22 - ALTISET Remote Control
Description
The ALTISET Remote Control is an optional accessory. It can be used to adjust the Military
ALTITRACK mBar, to switch backlight ON/OFF and to set the backlight intensity, either at the
same time or individually.
To transmit the commands, the ALTISET must be in line of sight and within 30 cm/10 inches of
the IrDA transceiver.
Fig. 39 - ALTISET front view Fig. 40 - ALTISET rear view
1.
“Linked” flashing LED when IrDA is searching for Military ALTITRACK
2. OLED displaying data for transmission to Military ALTITRACK
3. Left button
4. Mode button
5. Right button
6. IrDA port
7. Reset
8. Battery compartment
22.1 ALTISET Road Map
It is recommended that you familiarize yourself with the
ALTISET ROAD MAP
which is a very
helpful tool when using the
ALTISET
for the first time. See paragraph 22.2
Summary of Contents for Military ALTITRACK
Page 41: ...41 22 2 ALTISET ROAD MAP ...
