10
English
Basic operation
To explain how to play back input sources, representative examples are given with an CD player and an iPod.
Before starting either procedure, check the component is correctly connected to the Hybrid.
Disc playback on CD player
1. Press the power ON/OFF button of the CD player to activate power to it.
2. Press the POWER ON/OFF button of the Hybrid to activate power to it. Approximately 5 seconds after
power has been activated, the valves are warmed up and audio output is enabled.
3. Select the CD from the INPUT SELECTOR knob.
4. Load a disc into the CD player and press the play button to start playback.
5. Adjust the volume level from the VOLUME knob.
iPod playback
1. Press the POWER ON/OFF button of the Hybrid to activate power to it. Approximately 5 seconds after
power has been activated, the valves are warmed up and audio output is enabled.
2. Plug your iPod into the dock on top of the Hybrid.
3. Select iPod from the INPUT SELECTOR knob.
4. Press the PLAY/PAUSE button on the remote control to start playback.
5. Adjust the volume level from the VOLUME knob.
The Hybrid features an universal iPod docking to connect all kind of iPod’s with 30 pin connector.
Connecting an iPod
1. Mount the iPod docking shell, provided by Apple (packaging content of your iPod) to the universal iPod
docking on top of the Hybrid.
2. Plug in the iPod on the dock.
3. Select the iPod from the INPUT SELECTOR knob 3.
4. Press the PLAY/PAUSE button on the remote control to start playback.
10.
rEPEAt
button*
The REPEAT button gives direct access to the iPod
feature to repeat songs or playlists.
11.
sHuFFlE
button*
The SHUFFLE button gives direct access to the iPod
feature to randomize playlists.
12.
PlAy/PAusE
button*
PLAY and PAUSE the iPod.
* Only iPod.
