LT-3100S GMDSS User & Installation Manual Rev. 1.02
Installation and Mounting
Lars Thrane A/S
www.thrane.eu
Page 12 of 71
In order to avoid breaking the LT-3130 Antenna Unit N-connector (female), it is important not to use
tooling when connecting and fastening the coaxial cable N-connector (male) to the antenna unit. The
coaxial cable N-connector thread nut must be fastened only by using handcraft.
IMPORTANT
: Maximum allowed torque is 2 Nm when connecting the coaxial cable N-connector (male) to
the N-connector (female) of the LT-3130 Antenna Unit. No tooling must be used for
fastening the coaxial cable thread nut as illustrated on Figure 11 above.
Figure 11: Connecting coaxial cable N-connector to the LT-3130 Antenna Unit.
