Larksound S312, User Manual

Page: 24 / 32

DE
EN
FR
NL
IT
ES
If you have connected the soundbar to a Bluetooth device that supports
the A2DP and AVRCP profiles (Audio Video Remote Control), the
soundbar is used as an output medium and the audio signals are only
output through the soundbar.
In case of an incoming call, music playback is interrupted and only
continues when the call has ended.
For additional operating controls, use the controls on your audio output
device.
10. Operation
10.1. Selecting the audio source
`
Press the MODE button on the remote control or the soundbar once or several
times to select the desired audio source.
The selected audio source is shown on the display:
Display Operating mode
“ STDBY ” Standby mode
“ AUX ” AUX IN operating mode
“ BLUE ” Bluetooth mode
“ HDMI1/HDMI2 ” HDMI IN 1 or HDMI IN 2 operating mode
“ ARC ” HDMI OUT (ARC) operating mode
“ OPT ” OPTICAL operating mode
10.2. Setting the display brightness
`
In standby mode or when the device is in use, press the button on the
soundbar or the remote control to set one of three display brightness levels.
10.3. Setting the volume
`
Press the Vol + button on the soundbar or on the remote control to increase the
volume.
`
Press the Vol - button on the soundbar or on the remote control to decrease the
volume.
The current volume setting is shown on the display.
`
Press and hold Vol + / Vol - to continuously increase/decrease the volume.
Release the button when the desired volume setting is displayed.
43388 ML DS 5006 5202 Content Final.indb 61 43388 ML DS 5006 5202 Content Final.indb 61 16.03.2021 11:05:13 16.03.2021 11:05:13