OWNER′S MANUAL
3
B. Ring Pool Surface Skimmer
Insert the Ring Pool Holding Frame into the Skimmer
Canister
4
and then put the Lock Nut
5
onto the
screw hole of the Skimmer Canister
4
. Tighten the
Lock Nut
5
in clockwise to fix them by hand.
Insert the Ring Pool Holding Frame (Front)
2
into the
Ring Pool Holding Frame (Rear)
3
and then put the
Lock Nut
5
onto the screw hole of the Ring Pool
Holding Frame (Rear)
3
. Tighten the Lock Nut
5
in
clockwise to fix them by hand.
1
5
3
2
5
4
2
Insert the Skimmer Basket
6
into the Skimmer
Canister
4
.
Connect the hose into the hose connector on the
bottom of the Skimmer Canister
4
and fasten the
hose by hose clamp.
3
6
4
If the Suction Fitting of your pool is the same type as illustrated in
6.2
,
remove the Suction Fitting Screen from the Suction Fitting Base first.
Attach the Adapter to the Suction Fitting Base and fix tightly.
Then, connect the Hose
8
to the adapter, and tighten
the Hose Clamp
9
.
6.2
1
7B
9
8
Suction Fitting Screen
Suction Fitting Base
7B
7B
8
9
7
9
8