2
®
Hang the Frame Pool Surface Skimmer onto the top
pole of the frame pool and then turn the Clamp Lock
Screw in clockwise to tighten the Skimmer by hand.
4
Clamp Lock Screw
1
4
5
5
Tighten
Loosen
Loosen the Lock Nut
5
in anti-clockwise by hand
and adjust the position of the Skimmer Canister
1
on the Frame Pool Holding Frame
1
. The position of
the Skimmer Canister
1
should be set as the pool
water surface between the water level marking on the
Skimmer Canister
1
. Tighten the Lock Nut
5
in
clockwise to hold the Skimmer Canister
4
in your
setting position.
If the Suction Sitting of your pool is the same type as
illustrated in
6.1
, attach the Adapter to the Suction
Fitting and screw tightly.
6.1
1
9
8
7A
Suction
Fitting
7A
Insert the Skimmer Basket
6
into the Skimmer
Canister
4
. Connect the hose into the hose
connector on the bottom of the Skimmer Canister
4
and fasten the hose by hose clamp.
Turn the Lock Nut
5
in clockwise to tighten the
Frame Pool Holding Frame
1
by hand.
Insert the Frame Pool Holding Frame
1
into the
Skimmer Canister
4
. Put the Lock Nut
5
onto
the screw hole of the Skimmer Canister
4
.
SETUP INSTRUCTIONS
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
A. Frame Pool Surface Skimmer
1
5
4
1
1
5
2
6
4
3
8
9
7A
