Using the
After the searching is done, the tuner will show the first
channel automatically. Using CH+/ CH- buttons you can
choose any channel you wish. You can also press OK to
check the list of TV channels available and choose the one
you want to watch. TV/ R button allows you to switch
between television and radio.
Choose the „Earth antenna settings” to switch the external antenna power on.
POWER ON – for passive antennas, with no built-in supplier.
POWER OFF – for active antennas with built-in supplier.
buttons choose the desired option and than use the buttons to enter
the chosen setting. Press EXIT to exit the current menu level.
NOTICE!
NOTICE!
The frequency system depends on the region in which the tuner is used, hence the
frequency setting must comply with the requirements for the given region.
In case there are no LCN data in the stream the system will not set the channels according
to the LCN order, even if the LCN option is on. All the channels will be numbered „000”.
Therefore, in areas where no LCN function is available, the LCN mode should be
inactivated (OFF).
LCN
Antenna power
Using the device
14
/
/
