Tuner DVB-T
Installation
Automatic search
Manual search
Searching mode: By channels or By frequencies
Channel No..: Channels 5~12 ( VHF) or 21~69(UHF)
Frequency: 174~230MHz (VHF) or 470~862MHz (UHF)
Search
Signal strength
Choose INSTALLATION option in the main menu, than
press OK. The following submenu options will appear:
Automatic search
Using
After the searching is done, the tuner will show the first channel automatically.
Using CH+/ CH- buttons you can choose any channel you wish. You can also press OK
to check the list of TV channels available and choose the one you want to watch.
TV/ R button allows you to switch between television and radio.
Choose the Channel scanning submenu to see the following options:
Here you can find a specific channel by giving its number
or its frequency. To find a channel by its number you must
enter the band, the channel number and the network.
To find a channel by its frequency you must specify this
frequency and the band range.
Enter the specific number to find the desired channel.
This option is available only when the searching
‚
’ option is ON.
Enter the specific frequency to find the demanded channel.
This option is available only when the searching
‚
’ option is ON.
Press OK to enter the Search option and start the manual
searching
Signal quality:
The green bar showing the signal strength and the yellow bar showing the signal quality
allow you to trace the current TV signal status.
Manula search
Antenna power
LCN
buttons choose the needed submenu option and press OK to enter.
With buttons choose the setting you wish.
To exit the menu, press EXIT.
By channels
By frequencies
Using the device
13
/
/
