ED.
01 - 09/2022 - Cod. 150206
www.larius.com
48
OMEGA 5:1
21
22
17
23
24
18
20
17
20
18
25
26
27
28
29
30
19
19
Fig. 2N
Fig. 3N
Fig. 4N
IT
EN
•
Pull upwards the seat (
17
) so as to take out the valves
(
18
), the O-rings (
19
) and the springs (
20
) (clean and/or
replace the worn parts).
• Unscrew the lock nut (
21
) [take care of the washer (
22
)]
by keeping the bush (
23
) blocked using a wrench.
• Remove the seat (
24
) from the rod (
17
).
• Unscrew the bush (
23
) (if necessary, keep the rod (
24
)
blocked on the threaded part using pliers with the bits
wrapped in rags to avoid damage to thread).
• Remove the screws (
25
) [take care to the washers (
26
)],
a manifold (
27
) and the gasket (
28
).
Handle with care the manifold. The edges of its plate
are very sharp.
Important: do not remove the other manifold if not
necessary (it will facilitate the fastening of the
manifold removed).
• Using a screwdriver, remove the washer (
29
) and the rubber
pad (
30
).
