background image

www.larius.com

6

PREHETAER

REV. 01 - 12/2021 - Cod. 150196

E

160 mm

500 mm

A

B

FOR  CONNECTION BETWEEN PUMP, FLEXIBLE HOSE AND 
SPRAY GUN BEFORE USING THE EQUIPMENT.       

•   ALWAYS USE THE FLEXIBLE HOSE SUPPLIED WITH STAN

-

DARD KIT. 

•   THE USE OF ANY ACCESSORIES OR TOOLING OTHER THAN 

THOSE RECOMMENDED IN THIS MANUAL, MAY CAUSE 
DAMAGE OR INJURE THE OPERATOR.

•   THE FLUID CONTAINED IN THE FLEXIBLE HOSE CAN BE VERY 

DANGEROUS. HANDLE THE FLEXIBLE HOSE CAREFULLY. DO 
NOT PULL THE FLEXIBLE HOSE TO MOVE THE EQUIPMENT. 
NEVER USE A DAMAGED OR A REPAIRED FLEXIBLE HOSE.

The high speed of travel of the product in the hose 

can create static electricity through discharges 

and sparks. It is suggested to earth the equipment. 

The pump is earthed through the earth cable of 

the supply. 

The gun is earthed through the high pressure 

flexible hose.  

All the conductors near the work area must be 

earthed.

Avoid approaching too much to the pump piston 
rod when the pump is working or under pressure. 
A sudden movement of the piston rod can cause 
wounds or finger squashing.

Never spray over flammable products or solvents 
in closed places.

Never use the tooling in presence of potentially 
explosive gas.

Always check that the product is compatible with 
the materials composing the equipment (

pump, 

spray gun, flexible hose and accessories

) with 

which it can come into contact. Never use paints 
or solvents containing Halogen Hydrocarbons 
(

as the Methylene Chloride

). If these products 

come into contact with aluminium parts can 
provoke dangerous chemical reactions with risk 
of corrosion and explosion.

If the product to be used is toxic, avoid inhalation 
and contact by using protection gloves, goggles 
and proper face shields.

Take proper safety measures for the protection 
of hearing in case of work near the plant.

TECHNICAL DATA

PREHEATER

Supply voltage

220V

400V

Current

10A

Power of the heating element

2200W

Max working pressure

300 bar

Weight

18Kg

Max working temperature

90°C

Temperature pressure range

T. amb-90°C

Delivery

60l/h at 60°C

Height (A)

500 mm

Width (B)

160 mm

Summary of Contents for 6099















Reviews: