4.5 Clean the Main Brush
4.6 Clean/Replace the Side Brush
4.7 Clean the Sensor
The main brush is consumable and should be cleaned at least once a week. It is recommended to
replace the main brush every 6-12 months to ensure the cleaning effect.
The side brush is consumable. It is recommended to replace it every 3-6 months to ensure the
cleaning effect. Remove or install the side brush with a screwdriver.
It is recommended to use a clean, soft, dry cloth to wipe each sensor gently every week to ensure the
normal use of the machine.
Remove
Install
①
Reverse the robot vacuum, press the snap on the main brush cover, and remove
the main brush cover and the main brush.
②
Cut off the hair wound on the main brush with the cleaning knife.
③
Replace the main brush and the main brush cover. Press and fasten the snap.
Note:
Avoid hitting when reversing the robot to prevent damage to the lidar.
！
Main brush cover
Main brush
10
EN
If you have any questions, please email to [email protected]
Summary of Contents for L6 Pro
Page 1: ......
