ETHERLINE® GUARD | Issue 1e | 11.04.2022
8
•
Use ESD-compliant tools and clothing.
•
Do not touch components and assemblies at contacts.
1.6.5 EMC protection
In order to ensure electromagnetic compatibility (EMC) in your control cabinets and in an electrically
harsh environment, the known rules of EMC-compliant construction must be observed during design and
assembly. In particular, the functional earth (FE) connection must be connected to the potential
equalisation.
1.6.6 Operation
Only operate the unit when it is in technically perfect condition. The permissible operating conditions and
performance limits must be observed.
Retrofitting, modifications or conversions to the unit are strictly prohibited.
The unit is a piece of equipment for use in industrial installations. During operation, all covers on the unit
and the installation must be closed to ensure protection against accidental contact.
1.6.7 Liability
The contents of these operating instructions are subject to technical changes resulting from the
continuous further development of the products of U.I. Lapp GmbH. In the event that these operating
instructions contain technical errors or editorial mistakes, we reserve the right to make changes at any
time and without notice.
No claims for changes to products already supplied can be made on the basis of the information,
illustrations and descriptions in this documentation. In addition to the instructions contained in the
operating instructions, the applicable national and international standards and regulations must always be
observed.
1.6.8 Disclaimer
U.I. Lapp GmbH is not liable for damage caused by improper use or application of the products.
U.I. Lapp GmbH accepts no liability for any printing errors or other inaccuracies contained in the operating
instructions, unless they are serious errors of which U.I. Lapp GmbH is already demonstrably aware.
In addition to the instructions contained in the operating instructions, the applicable national and
international standards and regulations must always be observed.
U.I. Lapp GmbH is not liable for damage caused by software that is active on the user's devices and
impairs, damages or infects other devices or processes via the remote maintenance connection and
triggers or enables undesired data transfer.
U.I. Lapp GmbH shall not be liable in the event of incorrect calculation.
1.6.9 Warranty
Report defects to the manufacturer immediately after the defect has been detected.
The warranty expires in the event of:
•
Disregard of these operating instructions
•
Improper use of the appliance
•
Improper work on and with the unit
•
Operating errors
