ETHERLINE® GUARD | Issue 1e | 11.04.2022
22
7 Configuration
7.1 Basic configuration "Settings
“
The basic settings can be made in the "Settings"
menu.
With the button "
Change password
" the password
of the standard user "admin" can be changed.
With "
Alarm threshold for Q1
", the "cable status"
limit value for activating output Q1 can be set. If the
"cable status" reaches or falls below the value set
here, output Q1 is activated permanently.
The ETHERLINE® GUARD website is transmitted
to the browser in an SSL-secured manner. In the
factory state, an internal certificate is used for this
purpose. This cannot be authenticated by the
browser, the confirmation of the identity of the
device is not possible for the browser. To enable
this, the ETHERLINE® GUARD can be provided
with a
certificate
and an associated public key
suitable for the network in which it is used.
The MQTT Publisher can be activated under
"
Cloud protocol activation
". For more information
on this, please refer to the chapter 8.
7.2 Ethernet configuration (LAN)
In the "Ethernet Configuration" dialogue you can set
the LAN IP address, the subnet mask and the
gateway to suit your network.
If a DHCP server is available in your network for
assigning the IP address, you can use "DHCP: On"
to set that the ETHERLINE® GUARD is assigned
the IP address from this server.
