LAPLACE INSTRUMENTS RF300 Mk II-A, User Manual

Page: 11 / 32

Laplace Instruments Ltd
Page 11
3.3(b) Install the first loop on the stand. This is the horizontal
orientation. This task requires at least 2 persons.
The loop will simply rest in the slots at the top of the corner posts. Locate
the current transducer close to one of the corner posts. It will be found
that if the loop does not lie flat, by rotating it relative to the stand, and/
or inverting it, an optimum position can be found which results in the
‘flatest’ loop. Note that there is no requirement for a perfectly flat loop.
Some vertical displacement
round the loop will not affect
results.
Screw loops connectors into
transducer sockets. Do not
force, adjust alignment to ease
tightening
BNC outlet for cable to selector
unit
Screw loops connectors into
transducer sockets. Do not
force, adjust alignment to ease
tightening
BNC outlet for cable to selector
unit
Figure 10
Figure 11