LAPIS Semiconductor ML610Q174, User Manual

Page: 5 / 17

ML610Q174 Reference Board User’s Manual
3
1. Overview
1.1 Features
ML610Q174 Reference board is prepared by LAPIS SEMICONDUCTOR to have you study the operations of
ML610Q174.
The board is arranged so that necessary components are mounted by you according to your purpose, then only
minimum necessary components are mounted on the board by LAPIS SEMICONDUCTOR for brief use of
ML610Q174.
By using the board with "uEASE on-chip debug emulator" (hereinafter referred to "uEASE") and "free sample U8
Development Tools CD-ROM" which is bundled in the package of uEASE not only Software development/debugging
but also writing Flash ROM in the devices are capable.
This board also works in stand alone mode with external power suppy without uEASE.
ML610Q172 and ML610Q173 exist as 64 pin versions of ML610Q174.
Please use this board also for development and
debugging of the software of ML610Q172. Please refer to “ML610Q172/ML610Q173 User’s Manual” for the detail of
ML610Q174 and ML610Q172/ML610Q173.
Before starting works with this board, read below carefully and understand notices.
The hardware specification of this board is shown below.
Embedded
microcontroller
U1/U2(Mounting / IC-Socket): ML610Q174
・
UVDD
、
VSS: Input power supply pin
・
PWR: Jumper for input power supply switch ( 3pin pin-header and short pin )
・
CNUE: Connector for on-chip debug emulator ( 14pin connector )
・
XT_1/XT_2(Mounting / IC-Socket ): 32.768kHz oscillator
・
OSC_1/OSC_2(Mounting / IC-Socket): 8MHz oscillator
・
P20-P23,P90-P91: Light emitting diodes
・
C1-C3/C10-C12(Mounting / IC-Socket): Capacitors for LCD external input voltage connection
（
3 pieces
）
・
C4/C13(Mounting / IC-Socket): Capacitors for RESET_N pin.
・
C5/C14(Mounting / IC-Socket): Capacitors for VREF input voltage connection.
・
C6-C7/C15-C16: Capacitors for input voltage ( 2pieces )
・
C8-C9/C17-C18(Mounting / IC-Socket): Capacitors for 32.768kHz oscillator ( 2pieces )
・
R1-R6: Resistance for light emitting diodes (P20-P23,P90-P91
）
Embedded parts
・
R7-R9/R10-R12(Mounting / IC-Socket): Resistance for LCD external input voltage connection
（
3 pieces
）
・
SP1-SP6: Lands for light emitting diodes.
・
SP9-SP10(Mounting / IC-Socket): Lands for P10, P11 terminal connection
・
SP16/SP19(Mounting / IC-Socket): Pads for bonding of P85/VL2 and LCD external input voltage.
・
SP17/SP20(Mounting / IC-Socket): Pads for bonding of P84/VL1 and LCD external input voltage.
・
AIN0-AIN11: Land for SA-ADC terminal connection
Pads
for mounting
・
CN1-CN4: Pads for peripheral board connectors
（
30pin×2
、
20pin×2
、
2.54mm pitch
）
Other useful pads
・
VDD
、
VSS
、
UVDD
、
VREF
、
AIN0-AIN11
Operating voltage
・
VDD = +2.2V to +5.5V
、
VREF = +4.5V to +5.5V
Board size
・
100.00 x 120.00 mm
This board is made on the assumption that it is used carrying in a user circuit. When used with this board simple
substance, please use on an insulating material. An operation abnormality may be caused when used on a conductive
material.
ML610Q174 of the engineering sample may be carried in this board. Please confirm the final confirmation of an
electrical property etc. on mass production goods and customer's production board. The support about this board is not
accepted. Only in the case of initial failure, exchange responds.