Instruction manual
LED Batten
These instructions are for your safety. Please read through them thoroughly prior to use and retain them for future reference.
Parts and Fittings Supplied
Tools Required (not supplied)
Safety and Maintenance Information
GUARANTEE
Ref
Description
Illustration
Qty
Light fitting
A
B
1
1
2
EN
EN
Congratulations on your purchase of a quality LAP product. We are confident in the quality of this product, but for your peace of mind it comes with a 3 year guarantee. If your
product develops a fault within the guarantee period, please contact the retailer where the item was purchased, with your proof of purchase, where the product will be replaced or
refunded.
This guarantee specifically excludes:
• Fair wear and tear.
• Misuse or abuse.
• Lack of routine maintenance (see care instructions).
• Failure of fixings.
• Accidental damage.
• Cosmetic damage.
• Failure to follow the manufacturer’s fitting/ care and maintenance instructions.
This guarantee is limited to the purchase price of the product and the manufacturer’s liability does not extend to any costs damages or losses whatsoever in excess of that amount.
Proof of purchase is required. This guarantee does not affect your statutory rights.
Cap nut
Mounting
Accessories
Ref
Description
Illustration
Qty
C
2+2
2
• 6mm Cross Headed Screwdriver
• Pencil
• Check the pack and make sure you have all of the parts listed.
• Caution: Do not stare directly at the LED light beam.
• This product is suitable for installation on surfaces with normal flammability e.g. wood, masonry. It is not suitable for use on highly flammable surfaces or in flammable atmospheres.
• The product must be securely fixed to the mounting surface using the screws and wall plugs supplied. The screws and wall plugs supplied are suitable for "masonry" only. Fixings
for other surfaces are not supplied and must be purchased separately.
• Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
• Never use the terminal cables to bear the product weight.
• Ensure that the cables are fully unwound before use. Always organise cables and extension leads so that they will not present a hazard.
• Always switch off or disconnect from the mains when cleaning the product.
• Wipe clean with a soft dry cloth.Never use scourers,abrasives or chemical cleaners. Do not allow moisture to come into contact with electric parts.
• All fitting must be installed by a competent person in accordance with local regulations.
• It is suitable for outdoor use but should not be immersed in water or subjected to standing water.
•
IMPORTANT
: Ensure that all electrical connections are tight and that no loose strands are left out of the terminal.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
>80
4000 K
2100 lm
10 pcs
5 pcs
8 pcs
5 pcs
8 pcs
5 pcs
4400 lm
2700 lm
5600 lm
3200 lm
6000 lm
4000 K
4000 K
4000 K
4000 K
4000 K
>80
>80
>80
>80
>80
Specification
Input:
220-240 V~
BF3-1L12NC
BF3-2L12NC
BF3-1L15NC
BF3-2L15NC
BF3-1L18NC
BF3-2L18NC
xxWyy
220-240 V~
220-240 V~
220-240 V~
220-240 V~
220-240 V~
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store
for recycling advice.
Class II product - Double Insulated - No earth required.
This product is not suitable for dimming.
Jet-proof.
Manufacturing date code
xx: year of manufacturing; yy: week of manufacturing.
Conformity with all relevant EC Directive requirements.
22 W
43 W
30 W
60 W
32 W
60 W
Model Nr.
Wattage:
Ra :
Colour Temperature :
Total lumen
：
Max. number of inter-connected
IP65
Powersmith Ltd, BA22 8RT UK
L1
200 mm
400 mm
500 mm
BF3-1L12NC
BF3-2L12NC
BF3-1L15NC
BF3-2L15NC
BF3-1L18NC
BF3-2L18NC
Model No.
L1
1
4
7
10
11
8
9
5
6
2
3
L N
N
N
L
L
①
②
③
ON
1
2
≤
15mm
Ф5-10
mm
8mm
1.0-2.5 mm
2
H05RN-F
