-9-
Maintenance Instructions: AerosoL 3
Telescopic Lance
Replacing a damaged pole section:
When ordering replacement pole sections, they are referenced as follows:
• Section 1 (Butt section) Part Ref: ARL3-23.
• Section 2 (Middle Section) Part Ref: ARL38-06.
• Section 3 (Top Section) Part Ref: AL3-01.
1. Remove the clear PVC gasket from
the flexible tip and remove the internal
tubing kit by pulling out through the base
of the lance. Then remove the rubber
end cap.
2. Remove the damaged section from the
lance.
For detailed videos on the maintenance process see:
www.lanzmoir.com
3. Insert the new section by sliding it
back into the lance.
4. Straighten the flexible tip and feed
through the rubber end cap. Next push the
flexible tip and tubing back through the top
section of the lance (Make sure the
flexible tip is straight to enable it to be
pulled through the top section).
PVC gasket.
5. Refit the clear PVC gasket and then
put the top section back inside the lance.
6. Slide the rubber end cap back onto the
bottom of the lance.
PVC gasket.
EN
