background image

P06113000

www.lanzini.it

MODEL

EP s.p.a. Via del Commercio 1 - 25039 - Travagliato (BS) - ITALY

TM

EN

INSTRUCTIONS

INSTALLATION, USE AND MAINTENANCE

Warning!

 Security of the fitting is guaranteed only with the appropriate use of the 

following instructions: therefore it is necessary to preserve them.

Warning!

  Before  connecting  to  the  main  network,  during  assembly  or 

replacement of the product, make sure to disconnect the tension.

Warning!

 This lighting fitting’s flexible cable cannot be replaced. If the the cable is 

damaged, the luminaire must be changed.

Warning!

 The product has to be repaired only by professional technicians or by the 

manufacturer.

-  During  the  installation  of  the  system  scrupulously  respect  the  current  plant 

standards. Scrupulously follow the polarity of the wires: phase-brown / neutral-blue 

/  eart-yellow/green.  The  disregard  of  this  requirement  could  generate  small 

functional defects. For outdoor installation we recommend the use of a two-pole 

switch.

- The fitting should be used only if complete with its protection screen. 

TM: 

It’s a 

polycarbonate lens.

- For any replacement contact the manufacturing company. 

- The fitting must be installed by a professional electrician.

- The fitting cannot  be modified or tampered with in any way, any modification may 

compromise  security  by  making  it  dangerous.  The  manufacturer  declines  any 

responsibility for the modified products. 

- Class I fitting must be connected to the ground circuit of the electrical plant.

- Keep at least 1 m between the fitting and the illuminated surface. 

- Fitting suitable for indoor and outdoor applications. Protection degree IP65.

- Fitting suitable for direct mounting on normally inflammable surfaces

- For use in environments where an accumulation of non-conductive dust on the 

luminaire

Warning!

 Risk of electric shock

Power supply: 

220-240V Ac 50/60 Hz

 

Power 

Weight 

Dimensions                          Surface exposed to the wind

Operating temperature: 

-40° +45°C 

Insulation class: 

I

1 m

FR

INSTRUCTION

IINSTALLATION, USE AND MAINTENANCE

Attention!

  La  sécurité  du  projecteur  est  garantie  uniquement  avec  l'utilisation 

appropriée des instructions suivantes: vous devez donc les conserver.

-

 

Attention!

 

Avant  de  faire  des  connexions  réseau,  pendant  l'assemblage  ou  le 

remplacement du produit, assurez-vous que la tension a été supprimée.

-

 

Attention!

 

Le câble flexible de cet appareil ne peut pas être remplacé. Si le câble 

est endommagé l'appareil doit être changé.

Attention!

 L'appareil ne peut être réparé que par du personnel spécialisé ou par le 

fabricant. 
-  Lors  de  l'installation  du  système,  respectez  scrupuleusement  les  normes  en 

vigueur. Suivez scrupuleusement la polarité des fils: phase-marron / neutre-bleu / 

terre-jaune/vert. Le non-respect de cette exigence pourrait générer de petits défauts 

de  fonctionnement.    Pour  une  installation  en  extérieur,  nous  recommandons 

l'utilisation d'un interrupteur bipolaire.

-  L'appareil  doit  être  utilisé  uniquement  s'il  est  complet  avec  son  écran  de 

protection. 

TM

: c’est une lens en polycarbonate.

- Pour tout remplacement, contactez le fabricant.

- L'appareil doit être installé par un électricien professionnel.

-  L'appareil  ne  peut  être  modifié  ou  altéré  de  quelque  manière  que  ce  soit  une 

modification peut compromettre la sécurité en le rendant dangereux.

 - L’appareil de class I doit être connecté au circuit de terre de l’installation életrique.

- Maintenez au moins 1 m entre l'appareil et la surface éclairée. 

- Appareil adapte pour une utilisation en intérieur et extérieur. Degré de protection IP65.

- Appareil adapte au montage direct sur des surfaces normalement inflammables.

- Suivez la procédure illustrée pour une installation correcte.

 - Pour une utilisation dans des environnements où une accumulation de poussière 

non conductrice peut être attendue

Attention!

 

Risque de chol électrique

Voltage: 

220-240V Ac 50/60 Hz

 

Puissance    Poids 

Dimensions                              Surface exposée au vent

Température de functionnement: 

-40° +45°C 

Classe de protection: 

I

1 m

CEILING KIT OPTIONAL

TM - LKITA00000100013

CEILING KIT OPTIONAL

TM - LKITA00000100013

60 W 

1 Kg  

Ø193×97,3 mm 

 0,029  m²         0,007 m²

60 W 

1 Kg  

Ø193×97,3 mm 

 0,029  m²         0,007 m²

IP66

OUTDOOR

INDOOR

IT

-Questo prodotto contiene una sorgente luminosa di efficienza energetica classe 

EN

-This product contains a light source of energy efficiency class

FR

-Ce produit contient une source  lumineuse de classe d'efficacité énergétiques

D

Reviews: