3
The marking of products using lasers (Except for some areas)
NOTE
If you experience problems during installation, consult your
LANZAR
dealer.
If the unit fails to operate properly, press the Reset button. The unit returns to factory
setting when the Reset button is pressed. If the unit still fails to operate properly after the
Reset button has been pressed, contact your local
LANZAR
dealer for assistance.
The illustrations of the display and the panel appearing in this manual are examples used
to explain more clearly how the controls are used. Therefore, what appears on the display
on the actual equipment, and some of the illustrations on the display may represent
something impossible in actual operation.
Lens Fogging
Right after you turn on the car heater in cold weather, dew or condensation may form on
the lens in the DVD player of the unit. Called lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait for the condensation to evaporate. If the unit
still does not operate normally after a while, consult your
LANZAR
dealer.
Safety precaution
The label is attached to the chassis / case
and says that the component uses laser
beams that have been classified as Class 1. It
means that the unit is utilizing laser beams
that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
