BLUETOOTH
Bluetooth app allows Bluetooth pairing with compatible devices for making calls and music playback. To pair your
phone, ensure Bluetooth is enabled in your phone’s system settings and that you are disconnected from all other
devices.
In the Bluetooth app of your radio, press the “Gear” icon in the left column to access Bluetooth settings. Next, press
the “Magnifying glass” icon to set the radio into pair mode. The radio will then display “searching” and show all
nearby compatible Bluetooth devices:
•
Select your phone from the list, and tap a second time to initiate pairing.
•
Your phone should now display a pin pad where you will enter “0000”
•
Check that device named “CAR_KITT” shows as connected on your phone.
Note:
Once your phone is paired, you can use the other functions within the radio’s Bluetooth app.
Left hand column:
• Select the “Keypad” icon to dial out using the radio’s number pad
• Select the “address book” icon to display your phone’s contact list. You will need to import your contact list using
the “
download
” icon located in the right column of the Bluetooth app.
• Select the “phone” icon to see a log of incoming and outgoing calls
• Select the “gear” icon for phone pairing and selection options
• Select the “headphones” icon for music playback controls
Right hand column:
• “Trash” delete currently selected entry
• “Download” Use to download contact data to address book
• “Speaker selection” Switch between car speaker/mic and phone speaker/mic
• “ ” Press this function icon for search/disconnect/connect/delete
15
www.Lanzar.com
