manualshive.com logo in svg

Lantronix Xpress-Pro SW 94000, User Manual, Page: 49 / 106

Share
Download
Lantronix Xpress-Pro SW 94000 User Manual Download Page 49

5: Menu-Driven Console Management 

XPress-Pro SW 94000 User Guide  

49

 

3.  Enter 4 decimal bytes (dot separated) as the IP address to ping. 

4.  Move to highlight 

Count

 and press <Enter>.  

5.  Specify a packet count number from 1 to 999, or type 0 for an infinite packet count. 

Press <Enter>. 

6.  Move to highlight 

Size

 and press <Enter>.  

7.  Specify a packet size from 0-1500. Press <Enter>. 

8.  Move to highlight 

Timeout

 and press <Enter>.  

9.  Specify a timeout value from 1-999. Press <Enter>.  

10.  Press <Esc> to start to ping when completed with the ping parameters. 

Bridging 

1.  Move to highlight 

Bridging

 from 

Advanced Management

 screen, and press <Enter>. 

 

16.  Move to highlight 

Aging Time

 and press <Enter>. Enter a decimal number as bridge 

aging period in seconds.  
Or, enter 0 for no aging. 

17.  Move to highlight 

Flood Limit for All ports 

and press <Enter>. Choose 

Unlimited

 or 

enter a decimal number as flood limit in packets per second. Or, enter 0 for no limit. 

18.  Move to highlight 

Broadcast Limit 

and press <Enter>. Choose 

Unlimited

 or enter a 

decimal number as broadcast limit in packets per second. Or, enter 0 for no limit. 

19.  Move to highlight 

Multicast Limit 

and press <Enter>.  

20. Choose 

Unlimited

 or enter a decimal number as multicast limit in packets per 

second. Or, enter 0 for no limit. 

Static Filtering 

1.  Move to highlight 

Static Filtering

 from 

Advanced Management 

screen, and press 

<Enter>. 

Summary of Contents for Xpress-Pro SW 94000











































































































Reviews:

No comments