9: Service Settings
XPort Pro User Guide
70
3.
Click
Submit.
FTP Settings
The FTP web page shows the current File Transfer Protocol (FTP) configuration and various
statistics about the FTP server.
To configure FTP:
1.
Select
FTP
on the menu bar. The FTP page opens to display the current configuration.
Figure 9-6 FTP Configuration
2.
Enter or modify the following settings:
Table 9-7
FTP Settings
System Description
Enter the system description.
System Location
Enter the system location.
Traps State
Select
Enabled
to enable the transmission of SNMP Traps.
The Cold Start trap is sent on device boot up, and the
Linkdown trap is sent when the device is rebooted from
software control.
Traps Primary Destination
Enter the primary SNMP trap host.
Traps Secondary
Destination
Enter the secondary SNMP trap host.
FTP Settings
Description
State
Select
Enabled
to enable the FTP server.
Admin Username
Enter the username to use when logging in via FTP.
SNMP Settings (continued)
Description
