Updating Firmware
5. To upgrade a Web Page, expand the Web Pages selection by clicking the plus sign
next to Format. Select the Web Page to upgrade and a browse button will appear on the
right side of the field. Use the browse button to locate the web page file (*.cob). Click OK
and the file transfer begins. The Web Manager is loaded to WEB6 and the Configurable
Pins Applet is loaded to WEB1.
The Configuration buttons allow you to create and select a group of files, comprised of
several web pages and firmware files, that can be downloaded with one command. To
create a file set, select all of the files to download, then click the
Save
button to open the
Save As dialog. The defined set of files is saved to a *.ini file. To Load a file set, click the
Load
button to display a search dialog box. Only the path of the files is stored in the *.ini file.
If you change the location of the web pages or firmware, you must edit the corresponding
file set to match the new location. Click the
New
button to clear all selections.
5.2.2 Via TFTP
To download new firmware from a computer:
1. Use a TFTP client to send a binary file to the unit (*.ROM to upgrade the unit 's internal
operational code and *.COB to upgrade its internal Web interface).
Note:
TFTP requires the
.ROM
(binary) version of the unit's internal operational code.
2. In the
TFTP server
field, enter the IP address of the unit being upgraded.
3. Select Upload operation and Binary format.
4. Enter the full path of the firmware file in the
Local file name
field.
5. In the
Remote file name
field, enter the
current
internal operational code or
WEB6
for
the internal Web interface. (For XPort™,
X1
= Standard Tunnel)
6. Click the
Upload Now
button to transfer the file to the unit.
5-2
XPort™
User Manual and Development Kit