3: Summary of CLI Commands
XPort Pro™ Command Reference
47
display remote ip disable
The incoming RING has nothing following it.
display remote ip enable
The incoming RING is followed by the IP address of the
caller.
echo commands disable
Does not echo modem commands.
echo commands enable
Echoes modem commands.
echo pluses disable
Does not echo the +++ characters when entering modem
command mode.
echo pluses enable
Echoes the +++ characters when entering modem
command mode.
error unknown commands
disable
Returns OK on unknown AT commands.
error unknown commands
enable
Returns an error upon unknown AT commands.
exit
Returns to the tunnel level.
incoming connection
automatic
Automatically answer incoming network connections.
incoming connection
disabled
Disable incoming network connections.
incoming connection
manual
Wait for an ATA command before answering an incoming
network connection.
no connect string
Removes optional CONNECT string information for
modem emulation.
reassert
Asserts tunnel modem status with current configured
values.
response type numeric
Uses numeric type responses.
response type text
Uses text type responses.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays tunnel modem status.
verbose response disable
Does not send Modem Response Codes.
verbose response enable
Sends Modem Response Codes out on the Serial Line.
write
Stores the current configuration in permanent memory.