Lantronix XPort 080-318 Quick Start Manual Download Page 6

Page: 6 / 7

6. Click

the

Assign

button and wait several seconds until a confirmation message

displays. Click

Finish

7. Select the XPort from the main window list and click

Tools

Ping

. The results

display in the Status area. Click the

Clear Status

button to clear the window so you

can ping the device again.

Note:

If you do not receive “Reply” messages, make sure the unit is properly

attached to the network and that the IP address assigned is valid for the
particular network segment you are working with.

8. Click

the

Close

button.

Summary of Contents for XPort 080-318

Page 1: ...Part Number 900 312 Revision C August 2004 XPort Development Kit Quick Start Guide XPort Quick Start Guide ...

Page 3: ...r PC Connect one end of the Ethernet cable to the XPort Connect the other end of the Ethernet cable to your network hub Connect the Universal Power Supply to the XPort Evaluation Board Select the appropriate power plug adaptor for your geographical location Insert it into the slot on the Universal Power Supply then plug the power supply into an outlet ...

Page 6: ...ick ToolsÆPing The results display in the Status area Click the Clear Status button to clear the window so you can ping the device again Note If you do not receive Reply messages make sure the unit is properly attached to the network and that the IP address assigned is valid for the particular network segment you are working with 8 Click the Close button ...