4
Install DeviceInstaller
1. Open DeviceInstaller on the CD-ROM.
If the CD does not launch automatically:
a. Click
the
Start
button on the Task Bar and select
Run
.
b. Enter your CD drive letter, colon, backslash,
Launch.exe
(e.g., D:\Launch.exe).
2. Respond to the installation wizard prompts.
Note:
For more information about DeviceInstaller, see the DeviceInstaller User
Guide on the product CD and the DeviceInstaller help file.
Assign IP
The unit’s IP address is normally set to 0.0.0.0 at the factory. The hardware address is on
the product label. The unit is DHCP enabled as the default.
1. Click
Start
Æ
Programs
Æ
Lantronix
Æ
DeviceInstaller
Æ
DeviceInstaller.
If your PC
has more than one network adapter, a message displays. Select an adapter and click
OK
.
Note:
If the unit already has an IP address (e.g., DHCP has assigned an IP
address), click the Search icon and select the unit from the list of Lantronix
device servers on the local network.
2. Click
the
Assign IP
icon
.
3. If prompted, enter the hardware address (on the product label) in the format 00-20-
4a-XX-XX-XX, where the XXs are unique numbers assigned to the product. Click
Next
.
4. Select
Assign a specific IP address
and click
Next
.
5. Enter
the
IP address
. The
Subnet mask
displays automatically based on the IP
address; if desired, you may change it. On a local network, you can leave the
Default
gateway
blank (all zeros). Click
Next
.
