10
CONFIGURE WLAN SETTINGS CONTINUED
m)
Enable Power Management
: Select
Y
to reduce the WiBox’s overall
power consumption.
Note
: Enabling power management increases
the unit’s network response time.
n)
Enable Soft AP Roaming
: Choose to enable
Y
(Yes) or disable
N
(No) Lantronix's Smart Roam technology. The default value is N.
If enabled, SmartRoam manages the dynamic list of APs belonging to
the same network as the AP to which the WiBox is currently associated
and stores relevant selection criteria for this list.
2. Upon completing the IP and WLAN settings configuration, select menu
option
9
to save and exit the WiBox Serial Mode.
Q u i c k S t a r t G u i d e
WiBox 2100E
W W W . L A N T R O N I X . C O M
11
CONFIGURE WLAN SETTINGS CONTINUED…
f )
Encryption
: When WEP is enabled, select the encryption type.
g)
Display current key (N)
: Select
Y
to display the current key.
h)
Change Key
: Displays when WEP is enabled. Select
Y
to change the
encryption key.
i)
Key type
:
0
=Hex, 1=Passphrase (
0
) ?
j)
Enter key
: Enter the key at the prompt.
WEP key must be entered
in HEX format (0-9 A-F) xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx.
k)
TX Key index:
Select the WEP key used for transmissions.
l)
TX Data Rate
:
0
=Fixed, 1=Auto fallback (
1
) ?
If
0(Fixed)
is selected:
Change Key (N) ? _
TX Key index (1) ? 1
TX Data rate 0=1, 1=2, 2=5.5, 3=11
4=18, 5=24, 6=36, 7=54 Mbps (3) ?
Enable power management (N) ? _
Enable Soft AP Roaming (Y) ?
Encryption 0=WEP64, 1=WEP128 (0) ?_