4
W W W . L A N T R O N I X . C O M
GETTING STARTED
REQUIRED SETTINGS
For the WiBox to operate on a wireless network, two critical settings are required:
1. IP address settings
2. Appropriate wireless settings
By default, the WiBox is set to Ad Hoc network mode and its wireless network
name (SSID) is LTRX_IBSS.
DHCP
Many networks use an automatic method of assigning an IP address called
DHCP. The WiBox supports DHCP. However, before it can accept an IP address
from DHCP, the wireless settings must be configured.
In most installations, a fixed IP address and wireless LAN settings are desired. The
systems administrator generally provides these.
IP Address:
___ ___ ___ ___
Subnet Mask:
___ ___ ___ ___
Gateway:
___ ___ ___ ___
WLAN SSID:
________________ case-sensitive
WEP Enabled Y/N?
_______
WEP Key 64 bit or
128 bit:
_______
WEP Key: __________________________ entered in HEX format (0-9 A-F)
xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx-xx
Q u i c k S t a r t G u i d e
WiBox 2100E
5
PINOUTS
The two DB9M DTE serial ports
provide default settings for RS-232C
communications running at 9600
baud, 8 bits, no parity, and 1 stop bit
(9600, 8, N, 1).
Note:
See User Guide for RS422/485 pinout.
CTS (in)
RTS (out)
DTR (out)
GND
TX (out)
RX (in)
DCD (in)
5
1
6
9
DB9M DTE
Serial Connector
WiBox
Ethernet Connection
Power Plug
RJ45 Ethernet Port
▼
▼
