Lantronix
SISGM1040-284-LRT Install Guide
33808 Rev. E
42
User Information
Caution
: changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. The equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3 (A)/NMB-3(A)
RoHS, WEEE, and Environmental Programs
https://www.lantronix.com/legal/rohs/
Declaration of Conformity
Manufacture’s Name: Lantronics, Inc.
Manufacture’s Address: 48 Discovery, Suite 250, Irvine, California 92618
Declares that the products: SISGM1040-284-LRT Hardened Managed Ethernet Switch
Conforms to the following Product Regulations:
FCC Part 15 Class A, EN 55032:2015/AC:2016 Class A, EN 61000-3-2:2014, EN 61000-3-3:2013 and EN
55024:2010/A1:2015 (IEC 61000-4-2 Edition 2.0 2008-12, IEC 61000-4-3 Edition 3.2 2010-04, IEC 61000-4-4
Edition 3.0 2012-04, IEC 61000-4-5 Edition 3.1 2017-08, IEC 61000-4-6 Edition 4.0 2013-10, IEC 61000-4-8 Edition
2.0 2009-09, IEC 61000-4-11 Edition 2.1 2017-05), Australian Standard AS/NZS CISPR 32:2015.
IEC 60950-1:2005 (2nd E Am 1:2009 +Am 2:2013; and/or EN 60950-12006+A11:2009+ A12:2013.
UL listed, IEC62368-1/EN62368-1 and NEMA TS-2.
With the technical construction on file at the above address, this product carries the CE Mark
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standard(s).
Signature:
Fathi Hakam
Date: September 14, 2022
Full Name: Fathi Hakam
Position: Vice President of Engineering
Cautions and Warnings
Warning
: This unit is intended for installation in restricted access areas. A Restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
External metal part has a marking indicating that this part is hot.