Lantronix SGX 5150 Command Reference Manual Download

Page: 171 / 372

5: Commands and Levels

SGX™ 5150 IoT Device Gateway Command Reference

171

name

<name>

<start

port>

<target port>

<end

port>

<protocol>

<in-

gress ip>

<ip>

add ip address filter

<IP

address> <action>

Add a IP Address filter.

add mac address filter

<MAC address>

<action>

Add a MAC Address filter.

add route

<network>

<gateway>

<interface>

<metric>

Add a static route without a name.

add route with name

<name>

<network>

<gateway>

<interface>

<metric>

Add a static route with a name.

add virtual ip

<IP ad-

dress>

<lan ip address>

Add a Virtual IP.

add virtual ip with name

<name>

<IP address>

<lan ip address>

Add a Virtual IP with name.

clrscrn

Clears the screen.

default default ip address
filter policy

Restores the default value of Default IP Address filter policy (ACCEPT).

default ip address filter
policy accept

Sets the Default IP Address filter policy to ACCEPT.

default ip address filter
policy drop

Sets the Default IP Address filter policy to DROP.

default operating mode

Restores operating mode to the default value (Disabled).

default router ip address Restores IP address of router to the default value.

default router ipv6 ad-
dress

Clears the IPv6 address of router.

default wan interface

Restores preferred WAN interface to the default value.

delete all ip address fil-
ters

Deletes all ip address filters.

delete all mac address
filters

Deletes all mac address filters.

delete all routes

Deletes all static routes.

delete all rules

Deletes all port forwarding rules.

delete all virtual ip

Deletes all virtual interfaces.

delete ip address filter

<instance>

Deletes an entry from the ip address filters <instance> = index of the entry being removed

delete mac address filter

<instance>

Deletes an entry from the mac address filters <instance> = index of the entry being re-
moved

delete route

<instance>

Deletes an entry from the static routes <instance> = index of the entry being removed.

delete rule

<instance>

Deletes an entry from the port forwarding rules <instance> = index of the entry being re-
moved.

delete virtual ip

<in-

stance>

Delete virtual ip <instance> = index of the ip being removed.

dhcpserver

Enters the dhcpserver level.

exit

Returns to the config level.

firewall disable

Disables firewall on WAN interface.

Summary of Contents for SGX 5150





















































































































































































































































































































































































Search results

Summary of Contents for SGX 5150

Reviews:

Related manuals for SGX 5150

Brands by name

Popular brands

Lantronix SGX 5150, Command Reference Manual

Search results

Summary of Contents for SGX 5150

Reviews:

Related manuals for SGX 5150

Brands by name

Popular brands