Lantronix SecureLinx SLK Series, User Manual

Page: 97 / 160

SecureLinx SLK Remote KVM User Guide 5-1
5: Using the OSD Interface to Configure the SLK
This chapter describes how to use the local console’s On Screen Display (OSD)
interface to configure SecureLinx SLK Remote KVMs. Topics in this chapter include:
Overview
In addition to the web control interface, you can use the local OSD interface to config-
ure the SLK. During the SLK installation procedure, you used the OSD interface to per-
form the initial network configuration required to set up remote access. Generally, users
find the graphical web control interface more intuitive and easier to use than the OSD’s
text-based interface.
Topic Page Number
“Overview” 5-1
“Logging into the OSD” 5-2
“Navigating through the OSD” 5-3
“Channel Switch Menu” 5-4
“Setup Menu” 5-5
“Network Configuration Menu” 5-5
“PPP Options (SLC16 only)” 5-7
“Monitoring Settings Menu” 5-8
“Network Management Settings Menu” 5-11
“Security Settings” 5-13
“User Administration” 5-15
“Serial Port Configuration” 5-16
“Local User Control” 5-18
“Virtual Network Computing” 5-20
“Channel Configuration” 5-20
“Power Outlet Administration” 5-20
“Debug – (Factory Only)” 5-20