manualshive.com logo in svg

Lantronix SecureLinx SLK Series, User Manual, Page: 116 / 160

Share
Download
Lantronix SecureLinx SLK Series User Manual Download Page 116

Using the OSD Interface to Configure the SLK

5-20

SecureLinx SLK Remote KVM User Guide

Virtual Network Computing

If you can access the web control interface but cannot use the Java Viewer to remotely 
control the attached servers, you can choose Virtual Network Computing (VNC). This 
OSD screen allows configuration of the VNC server port number, bandwidth goal, and 
display resolution. It also displays the current OSD/VNC hotkey setting (this value must 
be changed through the web control interface).

❖

VNC server port number

: Specify a server port number or leave the default.

❖

Bandwidth goal

, 

network bandwidth

, and 

resolution

 can be set or optimized for 

those who use VNC frequently. Others may choose to keep the defaults.

Channel Configuration

This screen allows administrators to alter generic names (for example, Channel 1) to 
custom names that more accurately identify the attached server. Options include:

❖

Channel Name

❖

Emergency Contact Name

❖

Emergency Contact Number

❖

Operating System

❖

Mouse Acceleration Type (choose None, Microsoft Win, Sun Solaris)

Note: 

Operating systems use different mouse acceleration algorithms. Proper 

identification of the attached operating system allows the SLK to adjust mouse 
synchronization accordingly.

Power Outlet Administration

This screen allows administrators to alter generic names (for example, Outlet 1) on an 
attached power control unit to custom names that more accurately identify the attached 
server. Options include:

❖

Synchronize Outlet Names to Channel Names

Debug – (Factory Only)

This screen provides OSD map and maintenance options (including a warm reset fea-
ture).

 

Do not change settings in this submenu unless authorized by Lantronix 

Technical Support.

Summary of Contents for SecureLinx SLK Series

































































































































































Reviews:

No comments