Lantronix PremierWave XN User Manual Download Page 2 | Manualshive

Page: 2 / 143

background image

PremierWave® XN Intelligent Gateway User Guide

2

Intellectual Property

© 2016 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be
transmitted or reproduced in any form or by any means without the written permission of Lantronix.

PremierWave

are registered trademarks of Lantronix, Inc. in the United States and

other countries.

DeviceInstaller

is a trademark of Lantronix, Inc.

patents.lantronix.com

; additional patents pending.

Windows

and

Internet Explorer

are registered trademarks of Microsoft Corporation.

Mozilla

and

Firefox

are registered trademarks of the Mozilla Foundation.

Chrome

is a trademark of Google Inc.

Opera

is a trademark of Opera Software ASA Corporation Norway.

Safari

is a registered

trademark of Apple Inc.

Wi-Fi

is a trademark of Wi-Fi Alliance Corporation.

Python

is a trademark

of Python Software Foundation. All other trademarks and trade names are the property of their
respective holders.

Open Source Software

Some applications are Open Source software licensed under the Berkeley Software Distribution
(BSD) license, the GNU General Public License (GPL) as published by the Free Software
Foundation (FSF), or the Python Software Foundation (PFS) License Agreement for Python 2.7.3
(Python License). Lantronix grants you no right to receive source code to the Open Source
software; however, in some cases, rights and access to source code for certain Open Source
software may be available directly from Lantronix’ licensors. Your use of each Open Source
component or software is subject to the terms of the applicable license. The BSD license is
available at http://opensource.org/licenses. The GNU General Public License is available at

http://www.gnu.org/licenses/

. The Python License is available at

http://cmpt165.csil.sfu.ca/Python-

Docs/license.html

. Your use of each Open Source component or software is subject to the terms

of the applicable license.

OPEN SOURCE SOFTWARE IS DISTRIBUTED WITHOUT ANY WARRANTY, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
SEE THE APPLICABLE LICENSE AGREEMENT FOR ADDITIONAL INFORMATION.

Warranty

For details on the Lantronix warranty policy, please go to our web site at

www.lantronix.com/support/warranty

.

Contacts

Lantronix, Inc.

7535 Irvine Center Drive
Suite 100
Irvine, CA 92618, USA

Toll Free:

800-526-8766

Phone:

949-453-3990

Fax:

949-453-3995

Technical Support

Online:

www.lantronix.com/support

«
1
2
3
4
...
»

Summary of Contents for PremierWave XN
















































































































































Reviews:

No comments

Related manuals for PremierWave XN

MultiVOIP MVP210-SS

Brand: Multitech Pages: 36

Brand: 4G Systems Pages: 60

Brand: Spectrum Brands Pages: 2

Brand: SenseNet Pages: 11

Brand: M2M Pages: 357

SmartNode 5540 Series

Brand: Patton Pages: 73

ZyWALL USG 2000

Brand: ZyXEL Communications Pages: 120

Brand: ZyXEL Communications Pages: 2

P-661HNU Series

Brand: ZyXEL Communications Pages: 2

Brand: ZyXEL Communications Pages: 361

Brand: ZyXEL Communications Pages: 206

Brand: ZyXEL Communications Pages: 466

Brand: Fluke Pages: 65

Brand: D.I.P. Pages: 93

Brand: 2Wire Pages: 2

Brand: Technicolor Pages: 98

Brand: ViewSonic Pages: 1

Brand: ZyXEL Communications Pages: 361

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands