6: Network Settings
PremierWave® Intelligent Gateway User Guide
56
To Configure VPN Settings
Using Web Manager
To view or configure VPN information, click
VPN
in the menu.
Using the CLI
To enter the VPN command level:
enable -> config -> vpn
Using XML
Include in your file:
<configgroup name = "vpn">
GRE Settings
GRE tunneling is available on the PremierWave XC HSPA+ intelligent gateway, providing more
capabilities than IP-in-IP tunneling. For example, it supports transporting multicast traffic and IPv6
through a GRE tunnel.
Table 6-24 GRE Settings
Unreachable Host Detection
Host
Enter the Host to use failover host and ping interval to monitor connectivity
with a host on the remote network.
Ping Interval
Indicate the ping interval, in minutes, to use failover host and ping interval to
monitor connectivity with a host on the remote network.
Max Tries
Enter the tries for the VPN tunnel is restarted if Max Tries pings to the host
fail.
GRE Settings
Description
Name
Enter the user-defined name of the GRE tunnel.
State
Select to enable and disable GRE tunnel.
IP Address
Assign an IP address/mask for the GRE tunnel.
MTU
Enter the number of bytes indicating the largest physical packet size that the
network can transmit.
Local Network
Select the local network to use the GRE tunnel. Select
vpn
to use the VPN
network. Select
any
to use any available interface to remote host.
Remote Host
Enter the remote IP address to use for the GRE tunnel.
Remote Network
Enter the remote network to use for the GRE tunnel.
VPN Settings
Description
