3: Open-Q 845 µSOM Development Kit
Open-Q 845 µSOM Development Kit User Guide
27
Figure 8. Display Connector J1400
3.7.13 Camera Connectors J1000 (15), J1100 (16), J1200 (17), J1300 (18)
The Open-Q 845 µSOM Development Kit includes four camera interface connectors, J1000, J1100,
J1200, and J1300 allowing users to connect multiple camera adapters to the development kit. See items
15 through 18 in Figure 1 for the carrier board locations of the camera connectors.
Lantronix offers compatible camera module accessories for the Open-Q 845 µSOM Development Kit
https://shop.intrinsyc.com/collections/accessories
Exposed on each camera connector are the following interfaces:
•
One 4-lane MIPI CSI high speed camera interface
o
NOTE: The camera 4 connector J1300 includes only a 2-lane MIPI CSI interface.
•
Camera Control Interface (CCI) I2C bus for camera and actuator control
•
Additional GPIOs for general purposes available
•
Various power rails for powering the camera adapter
For details on the signal list provided on the camera connectors, see the development kit schematic (R-
3) and the camera adapter design guide technical note document (R-5).